BLPJT - 6-84 SPEEDHITE FLAT OFF WHITE LATEX

  • MSDS: BLPJT
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: 6-84 SPEEDHITE FLAT OFF WHITE LATEX
  • National Stock Number: 8010-00F019089
Product Identification

Product ID:6-84 SPEEDHITE FLAT OFF WHITE LATEX
MSDS Date:10/30/1981
FSC:8010
NIIN:00F019089
MSDS Number: BLPJT

Responsible Party
PPG INDUSTRIES INC
ONE GATEWAY CENTER
PITTSBURGH, PA 15222

Emergency Phone: (304) 843-1300

Info Phone: (304) 843-1300

Cage: 93915

Contractor
PPG INDUSTRIES INC CHEMICAL DIVISION
PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 93915

Ingredients

2,2,4 TRIMETHYLPENTANEDIOL 1,3 MONOISOBUTYRATE

Fraction By Weight: <5%


ALIPHATIC HYDROCARBON MIXTURE

CAS: 68514-35-2

Fraction By Weight: <5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADACHE & NAUSEA.
SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHES & NAUSEA. SKIN/EYES:
IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/COPIOUS
QUANTITIES OF RUNNING WATER FOR AT LEAST 15 MINS. SKIN: REMOVE
W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>200F
Fire Fighting Procedures:IF WATER IS USED, FOG NOZZLES ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER SPRAY MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP, POSSIBLE EXPLOSION OR
BURSTING WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:RETURN MATERIAL TO CONTAINER.

Handling

Handling and Storage Precautions:PROTECT FROM FREEZING.
Other Precautions:DON'T TAKE INTERNALLY. DON'T FLAME CUT, BRAZE, OR
WELD W/O NIOSH APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS: USE FILTER RESPIRATOR TC21C
TO REMOVE SOLID AIRBORNE PARTICULATES FROM OVERSPRAY. USE
COMBINATION ORGANIC VAPOR-FILTER RESPIRATORS TC23C DESIGNED TO
PURIFY THE AIR BY REMOVING SOLI D AIRBORNE PARTICULATES/ORGANIC
VAPORS.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME & PATTERN TO
KEEP Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:AS NEEDED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:112-495F
Vapor Density:Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:WHITE LIQUID
Percent Volatiles by Volume:68.98%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:PROTECT FROM FREEZING.
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.